Thread Sealing Anaerobic Adhesive

545 Anaerobic Thread Sealant

This is Taile 545 anaerobic thread sealant, purple high viscosity for hydraulic and pneumatic pipe threads up to M36.
It cures without oxygen between metal joints, stops liquid and gas leakage, anti-vibration.
Fixture time 40 minutes, fully cured in 24 hours. Thread can be disassembled for maintenance.
Perfect for hydraulic fittings, valves and industrial pipe assembly.

Taile 567 red anaerobic thread sealant is designed for general-purpose metal pipe thread sealing. It cures when oxygen is isolated between metal mating surfaces. Max applicable thread M60, fits water pipe, gas pipeline, hydraulic pipe fittings. Effectively prevent leakage under vibration. The joint can be disassembled by hand tools for later repair.

Feature 
Red medium-high viscosity
Working temp-50℃ ~ +150℃ 
Anti-leakage, vibration proof Removable for maintenance
Solvent-free formula

Notice: Only for metal threads. Keep good ventilation while operating. Not for big gap filling. Not for plastic substrates.

577 Anaerobic Thread Sealant
Taile 577 yellow high-viscosity anaerobic thread sealant is developed for heavy-duty large-size metal threads up to M80. It cures under oxygen-absent environment between tight-fitting metal surfaces. Widely used in heavy machinery, large-caliber industrial pipelines. High sealing strength against vibration and pressure impact, joint can be disassembled for maintenance.
Yellow high viscosity 24000 mPa·s
Max thread size M80
Operating temp:-50℃ ~ +150℃
High pressure resistance, vibration proof
Removable for heavy-duty equipment repair

Notice: Only for metal material. Work in ventilated condition. Not for plastic or large gap filling.