TL-204 is a colorless and transparent modified acrylic resin conformal coating. It features excellent environmental friendliness, free of heavy metals and aromatic solvents like xylene and ethylbenzene. Its low odor makes it very suitable for on-site operation. It can be applied by manual and mechanical brushing, dipping, flow coating, and spraying, with fast curing (5-10 minutes tack-free at 25℃). After curing, it forms a transparent protective film with good high and low-temperature resistance, excellent insulation, moisture-proof, anti-corrosion, salt spray resistance, and UL94 V-0 flame retardant properties. It has good adhesion (5B grade) to various circuit boards and is widely used for insulation and anti-corrosion protection of PCBs in home appliances, power supplies, instrumentation, and LED displays and lighting.Shelf life: 12 months

It is single-component ethyl cyanoacrylate instant adhesive with medium viscosity, featuring low whitening, mild odor and rapid surface curing within 15~30 seconds. It forms high shear strength bonding on metal, ABS, PC, nylon, rubber, ceramic and wood materials, applicable to small gap filling of irregular rough surfaces.
Stable fluidity matches manual glue bottles and automatic dispensing machines without clogging, widely used in consumer electronics, lighting hardware, automotive plastic parts and daily industrial assembly. Fully meet RoHS environmental standards, stable bonding performance under normal temperature environment.

498H is a one-component ethyl cyanoacrylate instant adhesive with high temperature and moisture resistance. With a viscosity of 800~1000 mPa·s, a fixture time of 8~20 seconds on steel, and a shear strength of 19 N/mm² on grit blasted steel, it offers excellent thermal cycling resistance: 150℃ for 2 hours, max tested 150℃ for 5 hours, instant 180℃. It is suitable for speaker assembly, PCB component fixing, motor bonding, and other high-temperature applications. Shelf life is 12 months, available in 20g and 1kg packaging.

Product Introduction
498 is a one-component ethyl cyanoacrylate instant adhesive with high temperature and moisture resistance. With a viscosity of 400~600 mPa·s, a fixture time of 8~20 seconds on steel, and a shear strength of 19 N/mm² on grit blasted steel, it offers excellent thermal cycling resistance: 150℃ for 2 hours, max tested 150℃ for 5 hours, instant 180℃. It is suitable for speaker assembly, PCB component fixing, motor bonding, and other high-temperature applications. Shelf life is 12 months, available in 20g and 1kg packaging.

419 is a one-component cyanoacrylate instant adhesive with high viscosity and toughness. With a viscosity of 1000~1500 mPa·s and a fixture time of 15~25 seconds, it offers good toughness and excellent impact resistance. It is suitable for bonding bakelite, carbon fiber, rubber, metal, and other materials. Typical applications include billiard cues and carbon fiber products. Shelf life is 12 months and packaging: 20g/1kg per bottle.

416 is a one-component ethyl cyanoacrylate instant adhesive specially designed for silicone bonding. Silicone requires no surface treatment, and it provides high strength on metal. With a viscosity of 200~250 mPa·s and a fixture time of 8~15 seconds, it can bond silicone to metal, silicone to silicone, gummy, TPE, ABS, PVC, and other materials, suitable for electronic assembly and precision bonding.

460 is industrial-grade methoxy cyanoacrylate instant glue developed for precision electronic assembly with strict appearance requirements. Different from traditional ethyl super glue, its exclusive methoxy formula greatly reduces volatile substances, realizing zero whitening and ultra-low odor after curing.
With ultra-low viscosity of 100–150cps, it flows freely to penetrate micro tiny gaps of precision components without overflow. It delivers excellent native adhesion to electronic components, various metals and engineering plastics, eliminating the need for surface primer for most electronic workpieces, simplifying production line processes and boosting assembly efficiency.
After full curing, the glue layer stays completely transparent without covering the original color of substrates, perfectly matching transparent electronic shells, light-color electronic accessories, acrylic ornaments and precision hardware assembly. It features stable shear strength, outstanding moisture and aging resistance to guarantee long-term stable performance of electronic finished products.

480 is a one-component ethyl cyanoacrylate instant adhesive with a rubber-toughened formula, equivalent to Loctite 480. It is black, with a viscosity of 800~1000 mPa·s, and provides high impact, peel, and vibration resistance. With a fixture time of 15~25 seconds and a shear strength of approximately 26 N/mm² on mild steel grit-blasted, it is suitable for bonding metal, rubber, elastomer, plastic, and especially metal-to-rubber and metal-to-magnet applications.

411 is a one-component ethyl cyanoacrylate instant adhesive with medium viscosity and a flexible formula. With a viscosity of 200~250 mPa·s and a fixture time of 8~15 seconds, it has lower blooming compared to standard ethyl-based adhesives. It can bond magnets to ABS, metal to rubber, leather, jewelry, rhinestones, and other multi-substrate applications, suitable for crafts and precision bonding.

401 is a one-component cyanoacrylate instant adhesive. It is a surface-insensitive, medium-viscosity instant adhesive suitable for porous, acidic, and absorbent materials. With a viscosity of 40~80 mPa·s, a fixture time of 10~20 seconds on steel, and a shear strength of ≥20 N/mm², it provides reliable bonding for metal, plastic, rubber, wood, paper, leather, and fabric. Shelf life is 12 months, packaging is 20g/1kg per piece.

411-B is a one-component ethyl cyanoacrylate instant adhesive specially designed for silicone bonding. Silicone requires no surface treatment, which simplifies the process and improves efficiency. With a viscosity of 60~80 mPa·s and a fast fixture time of 5~8 seconds, it can bond silicone, silicone rubber, soft PVC, PC, ABS, gummy, TPU, and other materials, suitable for electronic assembly and precision bonding.

406 is a one-component cyanoacrylate instant adhesive, designed as an equivalent to Loctite 406. It is a very low-viscosity instant adhesive (15~25 mPa·s) specially designed for the fast bonding of plastics and rubbers/elastomers, including EPDM. With a fixture time of 10~30 seconds and shear strength of ≥15.5 N/mm² on grit-blasted steel, it provides reliable bonding for ABS, PVC, PC, rubber, and other materials. With a primer, it can also bond difficult materials like PP, PE, and PTFE. Shelf life is 24 months.

M450 is a one-component ethyl cyanoacrylate instant adhesive with a soft, flexible formula. It has low blooming and low odor, making it suitable for soft material bonding and appearance-sensitive applications. With a viscosity of 150~250 mPa·s and a fixture time of 8~10 seconds, it can bond soft materials, soft plastics, rubber, elastomers, and other flexible substrates, suitable for crafts and precision bonding.

Model 508 is single-component ethyl cyanoacrylate instant adhesive with medium viscosity, featuring low whitening, mild odor and rapid surface curing within 15~30 seconds. It forms high shear strength bonding on metal, ABS, PC, nylon, rubber, ceramic and wood materials, applicable to small gap filling of irregular rough surfaces.
Stable fluidity matches manual glue bottles and automatic dispensing machines without clogging, widely used in consumer electronics, lighting hardware, automotive plastic parts and daily industrial assembly. Fully meet RoHS environmental standards, stable bonding performance under normal temperature environment.

Taile 3808DT-1 is one-part UV-moisture dual-cure acrylate adhesive. Light-exposed area cures fast under UV lamp; shadow zones cure via atmospheric moisture. Good flexibility, bending resistance, low shrinkage, high insulation. Widely used for FPC, TYPE-C, PCB solder joint & battery board reinforcement for mobile, laptop & tablet manufacturing. 30ml / 50ml cartridge available. Free sample support.

3808-2 is a one-component solvent-based UV curable tack-reducing acrylic adhesive. Core functions: it exhibits stable pressure-sensitive adhesion before UV irradiation to realize temporary lamination and fixation of wafers. Its adhesion decreases significantly after exposure to 365 nm ultraviolet light, enabling residue-free peeling of polyolefin carrier films. It is specially developed for high-cleanliness microelectronic processes such as temporary bonding of semiconductor wafers and peeling after precision coating, and is also applicable to temporary positioning and protection of optical films and precision hardware.

3808(3011)-1A Hydrolyzable UV Adhesive is a one-component UV-LED curable acrylate adhesive engineered for temporary glass-processing fixation. It delivers reliable bonding strength during glass thinning, etching and polishing procedures and features excellent hydrofluoric-acid resistance to withstand harsh manufacturing environments.

3320-4T is one-part LED UV curable acrylate adhesive, thixotropic paste with non-sagging performance. It delivers tack-free dry surface after curing, excellent flexibility and bending resistance, good thermal-shock performance. Great adhesion to PVC, PMMA, PC, ABS, PI, PS, TPU, metal and glass. Widely used for plastic dissimilar-material bonding and PCBA special component encapsulation reinforcement. Support heating dispensing for high-speed production line. Sample available.

This is one-component modified acrylate UV curing gap-filling & sealing adhesive. No reaction occurs without UV exposure. Under 365nm UV light source, it achieves rapid cross-linking curing. Medium-high viscosity delivers anti-sag property for narrow gap filling on electronic parts.
This glue delivers long-term robust bonding. Not designed for post-UV peel-off, different from UV-debonding adhesive series.

UV curing sealant is one-component acrylic resin adhesive. It cures rapidly under UV light, no mixing or heating required. After curing, the glue layer is dense and transparent, featuring waterproof, insulation, weather resistance and anti-yellowing performance. Widely used for sealing, filling and edge protection of electronic components, LED modules, optical parts, glass and plastic assemblies. Low shrinkage, excellent adhesion on PC, PMMA, glass, ABS, ideal for automatic dispensing mass production.

3830 is a semi-transparent UV curable adhesive customized for FPC flexible circuit board reinforcement. It cures rapidly under UV irradiation. After curing, it features good flexibility, high bonding strength, wide temperature resistance, solvent-free and low shrinkage. It reinforces and protects flexible cables, prevents FPC cracking during bending, and is compatible with automatic dispensing mass production.

3839 Shock Absorption UV Sealing Adhesive for TV LCD Screen Frame

Taile 510 High Temperature Anaerobic Flange Sealant For Rigid Metal Flange
Taile 515 General Purpose Anaerobic Flange Sealant Rigid Flange Gasket Replacement
Taile 518 Flexible Anaerobic Flange Sealant for Aluminum & Metal Flanges

Anaerobic adhesives are one-component acrylate adhesives that remain liquid when exposed to oxygen. When confined within tightly fitted metal gaps with air isolated and catalyzed by metal ions, they undergo polymerization and curing at room temperature.

Taile  is fast-curing UV fluorescent anaerobic retaining compound. It features ultra-fast fixture speed, high temperature and oil resistance. Ideal for automatic production line and high-speed bearing assembly. The fluorescent additive allows UV inspection to verify glue coverage, effectively locking cylindrical fits and eliminating fretting corrosion.

High strength pre-coated dry film threadlocker for mass production bolts → **204**

Taile‑8005 is a 10:1 two-part acrylic structural adhesive. It is specially developed for low-surface-energy plastics including PP, PE, PA and TPE. This two-component liquid adhesive can be applied by manual cartridge gun. After curing, it forms tough bond line with high shear strength, good impact resistance, aging resistance and solvent resistance. It can continuously work from -50℃ to 130℃, widely used for plastic parts assembly in automobile and electronic industries.

This is Taile 3831, single-component UV shadowless glue. No mixing needed. Under 365-405nm UV light, it cures in seconds. It creates nearly invisible bond line for glass, crystal, acrylic, PC and metal. Low shrinkage and good anti-yellowing, perfect for decorative & optical assembly.

Single‑component acrylic formula, remains liquid in contact with air. Cures at room temperature when confined in tight metal gaps without oxygen, no heating or UV light required.

TAILE‑3349 is a one‑component thixotropic UV‑visible light curable acrylic adhesive. Featuring a thixotropic formulation, it resists flowing and wicking along edges after dispensing. It forms a flexible adhesive layer upon curing to prevent stress cracking on stress‑sensitive plastics such as PC. It delivers good bonding strength to PC, ABS, acrylic, glass and metal.

TAILE‑3103 is a one‑component thixotropic UV‑visible light curable acrylic adhesive. Its thixotropic formulation prevents sagging and wicking after dispensing. It forms a flexible adhesive layer upon curing to avoid stress cracking of stress‑sensitive plastics such as PC. It delivers good bonding strength to PC, ABS, acrylic, glass and metal.

9210 is a two-component condensation silicone potting compound with a 10:1 mix ratio. It cures at room temperature to form a high-performance elastomer with excellent temperature resistance, waterproof, and electrical insulation properties. With an ultra-low hardness of Shore A 20±5 and a low mixed viscosity of 800±300 cps, it provides extremely low stress on sensitive components and excellent flowability to penetrate precision gaps. The working time is 40-60 minutes, suitable for potting complex structures. It is widely used for potting protection of PCB, LED power supplies, waterproof power supplies, automotive electronic modules, and other precision electronic components.

8122 is a one-component thermally conductive gel (thermal gap filler). It features superior thermal conductivity (2.0 W/m·K) and high fluidity, making it ideal for connecting components to heat sinks. It offers low contact thermal resistance, excellent anti-sagging and anti-cracking performance, and meets UL94 V-0 flame retardant rating. With a dielectric strength of ≥12 kV/mm and volume resistivity of 1.0×10¹³ Ω·cm, it provides reliable electrical insulation. It is suitable for mobile communication equipment, printed circuit board assemblies, new energy vehicle battery packs, optical communication equipment, automotive electronics, and fragile/delicate components.Shelf life is 12 months, available in 30cc & Customizable packaging.

8120 is a one-component thermally conductive gel (thermal gap filler). It features extremely low deformation force, good plasticity, and is capable of covering microscopic uneven surfaces to ensure full contact between mating parts, thereby improving heat transfer efficiency. It offers excellent anti-sagging and anti-cracking performance, good wettability, low contact thermal resistance, certain fluidity for diverse dispensing processes, and low compressive stress. With a thermal conductivity of 1.0 W/m·K, a dielectric strength of ≥12 kV/mm, and UL94 V-0 flame retardant rating, it is suitable for automotive electronics, industrial controllers, mobile communication equipment, tablets, multimedia devices, servers, and PCBA.Shelf life is 12 months, available in 30cc & Customizable packaging.

7518 (718-20) is a one-component thermally conductive bonding silicone specially developed for the electronics and electrical industry. It cures at room temperature by reacting with moisture in the air to form a high-performance elastomer with excellent physical and electrical properties. It features high thermal conductivity (2.0±0.2 W/m·K), fast deep curing, a neutral cure system, non-toxicity, non-corrosiveness, excellent adhesion to aluminum alloy, PC, ABS, good vibration resistance, and a UL94V-0 flame retardant rating. It maintains stable physical and mechanical properties from -50℃ to 200℃. It is the best choice for thermal conduction, bonding, fixing, and insulation encapsulation of heat-generating components in power adapters, chargers, switching power supplies, and LED lighting.Shelf life is 12 months.

Taile 2777 is a one-component, solvent-free, low viscosity, transparent silicone resin conformal coating with 100% solids. It contains a UV fluorescent indicator and can self-level quickly, making it easy to spray, dip, brush, or cast. It offers fast surface drying at room temperature (8-10 minutes), good thermal shock resistance, moisture resistance, and stable performance from -60℃ to +200℃. It meets UL 94V0 and is suitable for PCB conformal coating protection. Shelf life is 12 months, available in 1L, 5L, and 18L packaging.

TL-204 is a colorless and transparent modified acrylic resin conformal coating. It features excellent environmental friendliness, free of heavy metals and aromatic solvents like xylene and ethylbenzene. Its low odor makes it very suitable for on-site operation. It can be applied by manual and mechanical brushing, dipping, flow coating, and spraying, with fast curing (5-10 minutes tack-free at 25℃). After curing, it forms a transparent protective film with good high and low-temperature resistance, excellent insulation, moisture-proof, anti-corrosion, salt spray resistance, and UL94 V-0 flame retardant properties. It has good adhesion (5B grade) to various circuit boards and is widely used for insulation and anti-corrosion protection of PCBs in home appliances, power supplies, instrumentation, and LED displays and lighting.Shelf life: 12 months

G2577 is a one-component, self-priming, room temperature curing silicone conformal coating. It cures at room temperature in 5-10 minutes to form a film that combines the flexibility of rubber with a smooth, transparent surface. It offers excellent moisture-proof, weather-resistant, and salt-spray resistant properties, capable of withstanding harsh environments. It features excellent abrasion resistance, high electrical insulation (dielectric strength 36 kV/mm), and a wide operating temperature range of -65℃ to 200℃. It can be applied by spraying, brushing, or dipping, and is easy to repair. It is widely used for insulation and anti-corrosion protection of PCBs in automotive electronics, power supplies, communication base stations, instruments, home appliances, LED lighting, and solar applications.Shelf life is 12 months, available in 1L and 5L packaging.

2589 is a one-component modified acrylic conformal coating material with a UV+moisture dual-cure mechanism. It features 100% solids, a medium viscosity of 300-700 mPa·s, and a high dielectric strength of ≥50 kV/mm. It cures rapidly under UV light (10-30 seconds) and cures through moisture in shadow areas, providing reliable protection. It contains a fluorescent indicator for easy inspection, offers strong adhesion, waterproof and anti-corrosion protection, and is mainly used for conformal coating protection on PCB boards in industrial control, communication, and automotive electronics. The recommended coating thickness is 25±5 μm. Shelf life is 12 months.

2588 is a one-component modified acrylic conformal coating material with a UV+moisture dual-cure mechanism. It features 100% solids, a low viscosity of 150-250 mPa·s, and a high dielectric strength of ≥50 kV/mm. It cures rapidly under UV light (10-30 seconds) and cures through moisture in shadow areas, providing reliable protection. It contains a fluorescent indicator for easy inspection, offers strong adhesion, waterproof and anti-corrosion protection, and is mainly used for conformal coating protection on PCB boards in industrial control, communication, and automotive electronics. The recommended coating thickness is 25±5 μm. Shelf life is 12 months.

2587 is a one-component silicone conformal coating material. It features a solid content of 74%, a viscosity of 400 mPa·s, and a high dielectric strength of ≥20 kV/mm. It cures at room temperature with a tack-free time of 15-20 minutes, withstands temperatures from -50℃ to 200℃, and offers strong adhesion, waterproof and anti-corrosion protection. It complies with RoHS requirements and is mainly used for conformal coating protection on various PCB boards. The recommended coating thickness is 25±5 μm. Shelf life is 12 months.

2584 is a one-component modified polyurethane conformal coating material. It features an ultra-low viscosity of 60-90 mPa·s, a solid content of 40±1%, and an exceptionally high dielectric strength of ≥110 kV/mm. It contains a fluorescent indicator for easy inspection, cures at room temperature with a tack-free time of 15-20 minutes, and offers strong adhesion, waterproof and anti-corrosion protection. It complies with RoHS requirements and is mainly used for conformal coating protection on various PCB boards, such as industrial control, communication, home appliance controllers, and automotive electronic controllers. Shelf life is 12 months.

8822 A/B is a two-component polyurethane potting compound with 1:1 weight mixing ratio. It features low viscosity and excellent fluidity for filling complex narrow gaps. After curing, it forms a flexible black protective layer with outstanding waterproof, shock resistance, moisture-proof and electrical insulation performance. This potting material can pass double 85 reliability test (85℃ /85%RH). It is widely used for encapsulation and protection of circuit boards, controllers, sensors, igniters and other electronic parts.
Note: This product contains halogen. Not suitable for projects requiring halogen-free materials.

8806 is a two-component polyurethane potting compound with a 4:1 mix ratio. It has a black/gray appearance, a specific gravity of 1.5, a viscosity of 1800-2000 cps, a hardness of 45D, and a thermal conductivity of 0.8 W/m·K. It can be cured at room temperature or by heating, and provides good insulation, waterproof, and flame retardant protection. It is widely used for transformer potting, capacitor potting, tire pressure sensor potting, and electronic component encapsulation.

8800 is a two-component polyurethane potting compound with a 100:30 mix ratio. It has a black/gray appearance, a specific gravity of 1.3, a viscosity of 1000-1500 cps, a hardness of 82A, and a thermal conductivity of 0.6 W/m·K. It can be cured at room temperature or by heating, and provides good insulation, waterproof, and flame retardant protection. It is widely used for general purpose potting, electronic component encapsulation, transformer potting, and sensor potting.

2777 is a one-component, solvent-free, low viscosity, transparent silicone resin conformal coating with 100% solids. It contains a UV fluorescent indicator and can self-level quickly, making it easy to spray, dip, brush, or cast. It offers fast surface drying at room temperature (8-10 minutes), good thermal shock resistance, moisture resistance, and stable performance from -60℃ to +200℃. It meets UL 94V0 and is suitable for PCB conformal coating protection. Shelf life is 12 months, available in 1L, 5L, and 18L packaging.

TAILE 6615 is a two-component silver-filled modified epoxy conductive adhesive. Base and curing agent are matched at 1:1 weight ratio, packaged in 50ml dual cartridge for easy manual gun dispensing.
After complete curing, the adhesive layer possesses excellent electrical conductivity, thermal conductivity and EMI electromagnetic shielding capability, with high bonding strength to metal, PCB, ceramic and some plastics.
It supports two curing methods: room temperature curing and heating accelerated curing, flexible for different production line demands. Fully cured material meets RoHS 2.0 environmental requirements, widely adopted in industrial electronic assembly.

Taile 6601 SMT Adhesives Red Glue is a single-component, low-halogen epoxy resin adhesive. It is very suitable for medium to high-speed dispensing. It allows low-temperature curing, and even at high-speed and ultra-high-speed micro dot dispensing, it maintains no stringing, no overflowing, and no slumping. The stable dot shape is easy to control and preserve. It has good storage stability, excellent heat shock resistance, and excellent electrical properties. It is safe to use, solvent-free, odorless, and fully complies with environmental protection requirements.

100%无固体溶剂，即时快速固化，稳定的分装性能，广泛的材料兼容性，支持定制配方

EVA hot melt adhesive pellets are thermoplastic solid granules. It melts under heating and forms strong bond once cooled, no curing agent needed, 100% solvent-free. Designed for automatic melter, widely used in carton packing, gift box, shoe insole, woodworking and automotive interior assembly.

Hot melt adhesive is a 100% solid solvent-free thermoplastic adhesive, solid at room temperature, turns into flowing liquid after heating melting, achieves bonding after cooling and curing in seconds. No solvent volatilization, low VOC, eco-friendly and safe for automated production lines.
We supply full series formulas: EVA, APAO, Polyamide(PA), Polyester(PES), PUR reactive hot melt, available in pellets, sticks, blocks, films shapes. Matches all hot melt dispensers & hot melt coating machines, widely used in packaging, wood edge banding, automotive, textile, electronics, hygiene products industries, fully comply with RoHS & REACH standards

Hot melt adhesive is a 100% solid solvent-free thermoplastic adhesive, solid at room temperature, turns into flowing liquid after heating melting, achieves bonding after cooling and curing in seconds. No solvent volatilization, low VOC, eco-friendly and safe for automated production lines.
We supply full series formulas: EVA, APAO, Polyamide(PA), Polyester(PES), PUR reactive hot melt, available in pellets, sticks, blocks, films shapes. Matches all hot melt dispensers & hot melt coating machines, widely used in packaging, wood edge banding, automotive, textile, electronics, hygiene products industries, fully comply with RoHS & REACH standards

Hot melt adhesive is a 100% solid solvent-free thermoplastic adhesive, solid at room temperature, turns into flowing liquid after heating melting, achieves bonding after cooling and curing in seconds. No solvent volatilization, low VOC, eco-friendly and safe for automated production lines.
We supply full series formulas: EVA, APAO, Polyamide(PA), Polyester(PES), PUR reactive hot melt, available in pellets, sticks, blocks, films shapes. Matches all hot melt dispensers & hot melt coating machines, widely used in packaging, wood edge banding, automotive, textile, electronics, hygiene products industries, fully comply with RoHS & REACH standards

8822 A/B is a two-component polyurethane potting compound with 1:1 weight mixing ratio. It features low viscosity and excellent fluidity for filling complex narrow gaps. After curing, it forms a flexible black protective layer with outstanding waterproof, shock resistance, moisture-proof and electrical insulation performance. This potting material can pass double 85 reliability test (85℃ /85%RH). It is widely used for encapsulation and protection of circuit boards, controllers, sensors, igniters and other electronic parts.
Note: This product contains halogen. Not suitable for projects requiring halogen-free materials.

8806 is a two-component polyurethane potting compound with a 4:1 mix ratio. It has a black/gray appearance, a specific gravity of 1.5, a viscosity of 1800-2000 cps, a hardness of 45D, and a thermal conductivity of 0.8 W/m·K. It can be cured at room temperature or by heating, and provides good insulation, waterproof, and flame retardant protection. It is widely used for transformer potting, capacitor potting, tire pressure sensor potting, and electronic component encapsulation.

8800 is a two-component polyurethane potting compound with a 100:30 mix ratio. It has a black/gray appearance, a specific gravity of 1.3, a viscosity of 1000-1500 cps, a hardness of 82A, and a thermal conductivity of 0.6 W/m·K. It can be cured at room temperature or by heating, and provides good insulation, waterproof, and flame retardant protection. It is widely used for general purpose potting, electronic component encapsulation, transformer potting, and sensor potting.

Taile 8552 is a two-component polyurethane potting compound with ratio can be set according to different requirements. It has a white/black appearance, a viscosity of 1000-1500 cps, a hardness of 60D, and a thermal conductivity of 0.7 W/m·K. It can be cured at room temperature or by heating, and provides good insulation, waterproof, and flame retardant protection. It is widely used for motor potting, power supply module potting, electronic component encapsulation, and industrial control.

5622 is a two-component polyurethane structural adhesive with a 1:1 mix ratio. It provides high shear strength of 12 MPa and tensile strength of 12 MPa, with a hardness of 45D. It is suitable for structural bonding of metal, plastic, composite materials, and other substrates, with good impact resistance. It is widely used in automotive assembly, industrial assembly, and new energy battery bonding. Shelf life is 6 months.

6601  A/B is a two-component polyurethane potting compound designed for encapsulation and protection of electronic components. With a 1:5 mixing ratio, it cures at room temperature to form a tough, flame-retardant elastomer with excellent adhesion, physical performance, and electrical properties. It provides waterproof, sealing, filling, and insulation protection, effectively ensuring the stability and reliability of components. It is widely used in capacitors, small transformers, transformers, sensors, controllers, wire harnesses, charging pile controllers, and automotive electronics.

型号8266是一种双组分无溶剂聚氨酯电子封装复合物，由聚醚多醇和异氰酸酯系统组成。它具有低粘度和混合后自流平性能，在室温或加热条件下固化为柔性弹性体。非腐蚀配方完美保护PCB焊盘和精密元件。它克服了环氧树脂脆弱和硅橡胶附着力较弱的问题，为汽车和工业电子模块提供长期绝缘、防水和减震保护。

9210 is a two-component condensation silicone potting compound with a 10:1 mix ratio. It cures at room temperature to form a high-performance elastomer with excellent temperature resistance, waterproof, and electrical insulation properties. With an ultra-low hardness of Shore A 20±5 and a low mixed viscosity of 800±300 cps, it provides extremely low stress on sensitive components and excellent flowability to penetrate precision gaps. The working time is 40-60 minutes, suitable for potting complex structures. It is widely used for potting protection of PCB, LED power supplies, waterproof power supplies, automotive electronic modules, and other precision electronic components.

6224 is a two-component silicone foaming sealant. It consists of two liquid parts A and B, which cure and foam through an addition reaction after mixing at a 1:1 mass ratio. It features low water absorption, good resilience, and can be used in gradient 3D applications. It complies with RoHS environmental requirements and provides moisture-proof, vibration-proof, and insulation functions. It is suitable for bonding and sealing the frames of electronic, electrical, and instrument components.

8120 is a one-component thermally conductive gel (thermal gap filler). It features extremely low deformation force, good plasticity, and is capable of covering microscopic uneven surfaces to ensure full contact between mating parts, thereby improving heat transfer efficiency. It offers excellent anti-sagging and anti-cracking performance, good wettability, low contact thermal resistance, certain fluidity for diverse dispensing processes, and low compressive stress. With a thermal conductivity of 1.0 W/m·K, a dielectric strength of ≥12 kV/mm, and UL94 V-0 flame retardant rating, it is suitable for automotive electronics, industrial controllers, mobile communication equipment, tablets, multimedia devices, servers, and PCBA.Shelf life is 12 months, available in 30cc & Customizable packaging.

7518 (718-20) is a one-component thermally conductive bonding silicone specially developed for the electronics and electrical industry. It cures at room temperature by reacting with moisture in the air to form a high-performance elastomer with excellent physical and electrical properties. It features high thermal conductivity (2.0±0.2 W/m·K), fast deep curing, a neutral cure system, non-toxicity, non-corrosiveness, excellent adhesion to aluminum alloy, PC, ABS, good vibration resistance, and a UL94V-0 flame retardant rating. It maintains stable physical and mechanical properties from -50℃ to 200℃. It is the best choice for thermal conduction, bonding, fixing, and insulation encapsulation of heat-generating components in power adapters, chargers, switching power supplies, and LED lighting.Shelf life is 12 months.

7518(715-9) is a one-component flame retardant bonding silicone specially developed for the electronics and electrical industry. It cures at room temperature by reacting with moisture in the air to form a high-performance elastomer with excellent physical and electrical properties, and is compatible with addition-cure silicone potting compounds. It features fast deep curing, a neutral cure system, non-toxicity, non-corrosiveness, excellent adhesion to aluminum alloy, PC, ABS, good vibration resistance, and a UL94V-0 flame retardant rating. It maintains stable physical and mechanical properties from -50℃ to 200℃. It is the best choice for bonding, fixing, and insulation encapsulation of components in power adapters, chargers, and switching power supplies.Shelf life is 12 months.

Taile 2777 is a one-component, solvent-free, low viscosity, transparent silicone resin conformal coating with 100% solids. It contains a UV fluorescent indicator and can self-level quickly, making it easy to spray, dip, brush, or cast. It offers fast surface drying at room temperature (8-10 minutes), good thermal shock resistance, moisture resistance, and stable performance from -60℃ to +200℃. It meets UL 94V0 and is suitable for PCB conformal coating protection. Shelf life is 12 months, available in 1L, 5L, and 18L packaging.

G2577 is a one-component, self-priming, room temperature curing silicone conformal coating. It cures at room temperature in 5-10 minutes to form a film that combines the flexibility of rubber with a smooth, transparent surface. It offers excellent moisture-proof, weather-resistant, and salt-spray resistant properties, capable of withstanding harsh environments. It features excellent abrasion resistance, high electrical insulation (dielectric strength 36 kV/mm), and a wide operating temperature range of -65℃ to 200℃. It can be applied by spraying, brushing, or dipping, and is easy to repair. It is widely used for insulation and anti-corrosion protection of PCBs in automotive electronics, power supplies, communication base stations, instruments, home appliances, LED lighting, and solar applications.Shelf life is 12 months, available in 1L and 5L packaging.

2587 is a one-component silicone conformal coating material. It features a solid content of 74%, a viscosity of 400 mPa·s, and a high dielectric strength of ≥20 kV/mm. It cures at room temperature with a tack-free time of 15-20 minutes, withstands temperatures from -50℃ to 200℃, and offers strong adhesion, waterproof and anti-corrosion protection. It complies with RoHS requirements and is mainly used for conformal coating protection on various PCB boards. The recommended coating thickness is 25±5 μm. Shelf life is 12 months.

2777 is a one-component, solvent-free, low viscosity, transparent silicone resin conformal coating with 100% solids. It contains a UV fluorescent indicator and can self-level quickly, making it easy to spray, dip, brush, or cast. It offers fast surface drying at room temperature (8-10 minutes), good thermal shock resistance, moisture resistance, and stable performance from -60℃ to +200℃. It meets UL 94V0 and is suitable for PCB conformal coating protection. Shelf life is 12 months, available in 1L, 5L, and 18L packaging.

这是铂催化添加硅胶，催化剂中毒会导致固化不完全/表面粘稠。如果接触到以下物质，则在大规模生产前必须对小样品进行相容性测试：
1. 有机锡和锡硅橡胶;2. 硫、聚硫化物及含硫材料;
2. 胺类、PU胶及含氨产品;4. 磷材料;
3. 有机酸酸性物质;6. PCB焊锡助焊残留。
工具提示：A部分和B部分分开混合工具和容器，交叉接触会导致过早凝胶和浪费。

Model 6188 is single-component neutral room-temperature curing silicone sealant, moisture curing under normal temperature. Featured with high bonding strength, good toughness, excellent waterproof, insulation, oil-proof and weather resistance. Working temperature ranges from -50℃ to 180℃, stable physical properties under alternating cold and hot environment. Compatible with metal, plastic, rubber, glass, ceramic and electronic components, widely used for electronic fixing, equipment sealing, automotive parts bonding. Meet RoHS & REACH environmental standards, stable dispensing performance matched with manual glue gun & automatic dispenser.

This is model 9185 one-part neutral alkoxy silicone sealant. No mixing required, it becomes tack-free in only 8 minutes to speed up your production line. It’s non-sag paste for vertical dispensing and non-corrosive to PCB, optical and plastic parts. With low volatility and high elongation, it relieves thermal stress perfectly. Stable from -55℃ to 180℃ with excellent insulation & waterproof performance, ideal for circuit boards, automotive sensors and display frame sealing. We provide free samples and customized packaging support.

This is modified neoprene based spray adhesive adopting low irritating eco solvent formula with mild odor. Fine atomization will not corrode sponge, PU leather and other soft substrates. Long open time greatly improves workshop production efficiency. The cured adhesive layer is flexible with good water & aging resistance, effectively preventing delamination and blistering. Widely applied in soft furniture, sound-absorbing boards, luggage & interior decoration. All products meet RoHS and REACH standards for North America export.

Stable thixotropy ensures smooth extrusion, no wire drawing & no clogging during long-running dispenser work，Constant viscosity will not change under air pressure, keeping consistent glue volume in automatic dispensing equipment，Matches standard cartridge packaging, directly installed on dispenser without extra refilling operation